- White LED strobe/blinder
- 5 x 5 matrix panel
- Individually controllable LEDs
- Preprogrammed macros (effects, letters, numbers, etc.)
- Linkable - integrated horizontal and vertical locking
- DMX or sound activated
- Multiple DMX control options
- 3 & 5 pin XLR
Product Overview
This white strobe/blinder is a 5 x 5 LED matrix panel with individually-controllable LEDs. Controllable via multiple DMX options or sound activated, it includes preprogrammed effect, letter and number macros for easy-to-produce graphics and messaging. Panels link via an integrated horizontal and vertical locking mechanism
Physical
Length: 500 mm (19.7 in.)
Width: 101 mm (4.0 in.)
Height: 500 mm (19.7 in.)
Weight: 9.5 kg (20.9 lbs.)
Dynamic Effects
Strobe effect: Electronic, with regular and random pulse, burst and strobe effects
Pre-programmed effects: Effect, letter and number display macros
Electronic dimming: 0 - 100% continuous, individually dimmable pixels
Effects orientation: Standard or inverted 180°
Control and Programming
Control options: DMX, stand-alone
DMX channels: 4/25/29
Stand-alone trigger options: Music trig, auto trig
Stand-alone sequences: 8 pre-programmed shows or random show
Stand-alone memory: 20 scenes
Setting and addressing: Control panel with LED display
DMX compliance: USITT DMX512/1990
Optics
Light source: 25 x 5 W Cree cool white LEDsColor temperature: 6000 - 6500 KMinimum LED lifetime: 50 000 hours (to >70% luminous output)**Figure obtained under manufacturer´s test conditions
Construction
Color: Black
Housing: SteelProtection rating: IP20
Installation
Location: Indoor use only, must be fastened to surface or structure
Mounting points: Integral hanging brackets (removable), side-by side mounting locks
Orientation: Any
Connections
AC power in/thru: Neutrik PowerCon
DMX data in/out: 3-pin and 5-pin locking XLR
Electrical
AC power: 100-240 V nominal, 50/60 Hz
Typical total power consumption: 148 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.
Typical Power and Current
110 V, 60 Hz: 2.0 A, 148 W
230 V, 50 Hz: 1.2 A, 146 W
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
Thermal
Cooling: Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C (104° F)
Minimum ambient temperature (Ta min.): 0° C (32° F)
Total heat dissipation (calculated, +/- 10%): 510 BTU/hr.
