Martin Multibeam 2

Product Overview

The RUSH Multibeam 2 is a versatile effect light featuring two moveable LED bars each with 5 individually controllable narrow beams for powerful mid-air effects. It punches out 10 intense and narrow long-throw beams and features electronic dimming and strobe effect. Multibeam 2 comes with preprogrammed macros for easy effects, host / client function as well as DMX or sound activation.

Powerful and intense multibeam effect
10 individually controllable 10 W RGBW LEDs
Two individually controllable bars

Physical

Length: 473 mm (18.7 in.)

Width: 248 mm (9.8 in.)

Height: 164 mm (6.5 in.)

Weight: 9.5 kg 21.0 lbs.)

Dynamic Effects

Color mixing: RGBW

Color selection: 32 color presets

Electronic 'shutter' effect: Strobe effect, pulse effects, instant open and blackout

Pre-programmed effects: 12 pre-programmed macros with adjustable speed

Electronic dimming: 0 - 100%

Control and Programming

Control options: DMX, stand-alone, host/clientDMX channels: 44

Stand-alone trigger options: Music trig, auto trig

Setting and addressing: Control panel with LCD display

Protocol: USITT DMX512/1990

OpticsLight source: 10 x 10 W RGBW Cree XM-L LEDs

Minimum LED lifetime: 50 000 hours (to >70% luminous output)*Beam angle: 8°*Figure obtained under manufacturer's test conditions

ConstructionColor: Black

Housing: High-impact flame-retardant thermoplastic

Protection rating: IP20

InstallationMounting points: Two quarter-turn brackets for rigging clamps

Location: Indoor use only, must be fastened to surface or structure

Orientation: Any

Connections

AC power in/thru: Neutrik PowerCon

DMX data in/out: 3-pin and 5-pin locking XLR

Electrical

AC power: 100-240 V nominal, 50/60 HzTypical

total power consumption: 130 W

Power consumption figures are typical, not maximum. Allow for +/-10% variation.

ThermalCooling: Forced air (temperature-regulated, low noise)

Maximum ambient temperature (Ta max.): 40° C (104° F)

Minimum ambient temperature (Ta min.): 0° C (32° F)

Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 450 BTU/hr.

Approvals

EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety:

UL 1573US EMC: 47 CFR Part 15 Class AAustralia/NZ: C-TICK N4241

Included ItemsPower cable 1.5 m

AccessoriesCables, 16 A, for connection to power in chainsPower input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511Power connectorsNeutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805Installation hardwareHalf-coupler clamp: P/N 91602005G-clamp (suspension vertically downwards only): P/N 91602003Quick-trigger clamp (suspension vertically downwards only):P/N 91602007

Related ItemsRUSH™ Software Uploader 1: P/N 91611399

Ordering InformationRUSH Multibeam 2™ in cardboard box: P/N 90480030